Penggunaan Semen Portland Sebagai Bahan Pengganti Abu Batu/Filler terhadap Karakteristik Aspal AC-WC

Ade Arya Ma’ulva, Ahmad Ridwan, Bobby Damara

Abstract


The need for high-quality road infrastructure encourages the improvement of pavement material performance, especially asphalt concrete mixtures. One of the important components in AC-WC asphalt concrete mixtures is filler, which functions to fill the voids between aggregates and increase mixture stability.This study aims to determine the effect of using Portland cement as a substitute for stone ash (filler) on the characteristics of AC-WC asphalt mixture. Tests were conducted at the Civil Engineering Laboratory of Lamongan Islamic University, using quantitative methods. Some of the parameters tested included specific gravity, ductility, softening point, flash point, and asphalt burn point, as well as Marshall testing to determine the values of stability, flow, and Marshall Quotient. This research used Portland cement filler with variations of 0%, 2%, 4%, and 5%.The results showed that the highest Marshall Properties value was found in the 5% variation with a stability value of 1472.13 kg, VMA value of 19.12%, VFA value of 80.84%, VIM value of 3.66%, flow value of 3.10 mm, and MQ value of 474.88 kg/mm. Thus, Portland cement can be used as an alternative filler in AC-WC asphalt mixtures to support better performance of the top pavement layer.


Keywords


AC-WC Asphalt, Asphalt Mixture Characteristics, Portland Cement

Full Text:

PDF

References


A’yuni, H. E. P., & Widayanti, A. (2024). Pengaruh Pemanfaatan Abu Tempurung Kelapa Sebagai Bahan Pengisi (Filler) pada Campuran Aspal Lapis AC-WC (Asphalt Concrete-Wearing Course). Jurnal Media Publikasi Terapan Transportasi, 1(April), 107–119. https://doi.org/10.26740/mitrans.v1n1.p107-119

Abdillah, M. Z., & Kartikasari, D. (2018). Substitusi Filler Pada Campuran Aspal Dengan Fly Ash Dan Serbuk Batu Bata. Jurnal CIVILA, 3(1), 124. https://doi.org/10.30736/cvl.v3i1.219

Adi, H. (2011). The executioners. KARAKTERISTIK CAMPPURAN ASPHALT CONCRETE-WEARING COURSE (AC-WC) DENGAN PENGGUNAAN ABU VULKANIK DAN ABU BATU SEBAGAI FILLER, 15(Jurnal Rekayasa).

Ayzadt, M., Nurdin, A., & Bahar, F. F. (2024). Analisis Kandungan Material Campuran Aspal Panas Mix Design AC-WC terhadap Rekonstruksi Jalan Ruas N-029.1 Bts. Kab. Muaro Jambi / Kab. Tanjabtim-Bts. Kab. Tanjabbar. Jurnal Talenta Sipil, 7(2), 550. https://doi.org/10.33087/talentasipil.v7i2.517

Bina, M. (2018). SPESIFIKASI UMUM 2018, DIVISI 6. Military Engineer, 77(502), 428–429. https://doi.org/10.1201/b17043-19

Choirunnisa, DhyvaWidayanti, A. (2025). Analisis Kerusakan Jalan dan Penentuan Penanganannya dengan Aplikasi Pada Analysis Of Road Damage and Determination Of Treatments With Application On Link 166 In Jombang Regency. 3(1), 36–45.

Fatmawati, L. (2013). Karakteristik Marshall Dalam Aspal Campuran Panas AC-WC Terhadap Variasi Temperatur Perendaman. Jurnal Wahana Teknik Sipil, 18(2), 88–94.

Febrianto, N., Setyawan, A., & Sarwono, D. (2014). Sifat-Sifat Marshall Pada Lapis Tipis Campuran Aspal Panas Dengan Penambahan Crumb Rubber. e-Jurnal Matriks Teknik Sipil, 748–758.

Gunawan, F., Nugroho, M. W., Sipil, T., Hasyim, U., & Jombang, T. (2023). Evaluasi Nilai Stabilitas Pada Aspal AC-WC Dengan Metode SNI 06-2489-1991 maka perlu digunakannya bahan tambahan dalam komposisi campuran aspal. 1(2), 90–100.

Irwansyah, S. S. A., Desembardi, F., & Sukowati, D. G. (2022). Pengaruh Temperatur Pada Campuran Aspal AC-WC Dengan Parameter Marshall-Test. Jurnal Ilmiah Teknik Sipil : JIMATS, 1(1), 13–18.

Jebur, Y. M., Falah, M. W., Kadhim, M. A., Imran, M. K., Hashim, T. M., Obeid, Z. S., Hussien, S. A., & Kadhim, R. H. (2024). Effect of Filler Type and Content on The Mechanical Properties of Asphalt Mixtures. AIP Conference Proceedings, 3009(1). https://doi.org/10.1063/5.0190471

Prasetyo, H., & Arif, S. (2018). Studi Pencampuran Serat Eceng Gondok Sistem Hot Rolled Sheet Bc Spesifikasi Seksi-6 : 2010 Bina Marga. Jurnal CIVILA, 3(2), 146. https://doi.org/10.30736/cvl.v3i2.256

Putra, M. T., Destania, H. R., & Febryandi, F. (2023). Analisis Karakteristik Marshall Campuran Aspal Modifikasi pada Asphalt Concrete – Wearing Course (AC – WC) dengan Penambahan Serbuk Ban Kendaraan. Jurnal Teknik Sipil, 19(2), 335–350. https://doi.org/10.28932/jts.v19i2.5580

Septiawan, T. D. (2018). Pengaruh Penggunaan Bahan Tambah Serbuk Karet Ban Pada Campuran Lapis Aspal Beton. Jurnal Rekayasa Sipil, 1(1), 9–17. http://www.riset.unisma.ac.id/index.php/ft/article/view/1088

Sulandari, E., Lestyowati, Y., Felderika, F., & Sutarno, S. (2024). Analisis Pengaruh Sifat Volumetrik pada Campuran AC-WC. CRANE: Civil Engineering Research Journal, 5(2), 41–47. https://doi.org/10.34010/crane.v5i2.14070




DOI: http://dx.doi.org/10.33087/talentasipil.v8i2.968

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University
Adress: Fakultas Teknik, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: talentasipil.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.