Evaluasi Penerapan Keselamatan dan Kesehatan Kerja Bekerja di Ketinggian pada Konstruksi Bangunan Gedung
Abstract
Building construction work is one of the sectors with a high risk of work accidents, especially in activities at height. This risk is influenced by project dynamics, limited workforce experience, work environment conditions, and weak implementation of occupational safety and health (K3) management. This study aims to identify the main problems in construction work at height and evaluate the implementation of applicable K3 regulations, standards, methods, and techniques. The focus of the study is directed at the consistent application of K3 Construction methods and regulations at the stages of implementing lower structure, basement, architecture, upper structure, mechanical, electrical, plumbing (MEP) to testing and specifically for upper structure and MEP work, K3 Construction methods and regulations and K3 working at height are applied. The research method used is evaluative-qualitative with field observation and document analysis, followed by integrated application of K3 procedures on the projects studied. The results of the study after the joint application, references, standard procedures, regulations, K3 construction methods and K3 working at height that are consistent in the construction projects that have been observed, it is concluded that the method has been able to significantly minimize work accidents in the workplace.
Keywords
Full Text:
PDFReferences
PP No. 50 (2012). Peraturan Pemerintah Nomor 50 Tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja. LNRI, 2012 Nomor 100 TLNRI Nomor 5309, https://temank3.kemnaker.go.id
Rahmatullah, Bobby Umroh, Arfis Amiruddin, Ahmad Marabdi Siregar, 2022, Implementasi Keselamatan dan Kesehatan Kerja (K3) Pada Aktifitas Fabrikasi (Pengelasan, Pemotongan, Penggerindaan) di Kota Medan, Jurnal Rekayasa Material, Manufaktur dan Energi, Vol. 5, No. 2, Hal 175- 185, ISSN 2622-7398
Rahmatullah, Bobby Umroh, Arfis Amiruddin, Yudi Daeng Polewangi, Sudirman Lubis, 2024, Risk Assessment of Manufacturing Hydraulic Press Paving Block Machine, jurnal cered Indonesia, Volume 5 Number 1 page 29 – 38.
Rizky Dwi Prasetyo, Evi Widowati, 2022, Implementasi Standar K3 Ketinggian Sebagai Upaya Pencegahan Kecelakaan Kerja di Proyek X (Studi Kasus Pembangunan Gedung X Kota Semarang), HIGEIA Journal of Public Health Research and Development, HIGEIA 6 (4) (2022), 332-343
Ferdinand Fassa, Andre Feliks Setiawan, Nico Agnidjunaedi, 2024, Analisis Kesadaran Pekerja terhadap Penggunaan Alat Pelindung Diri (APD) pada Pekerjaan di Ketinggian dalam Proyek Konstruksi, IJCEE Vol.10 No.2 December 2024, Page 45-54, ISSN 2598-2931
CCOHS. (2021). Prevention of Slips, Trips and Falls. Canadian: OSH Answers Fact Sheets. Retrieved from www.ccohs.ca.
Teti, B., Cruz, F. d., Vasconcelos, B., Lago, E., Zlatar, T., & Barkokébas, B. J. (2018). Working at Heights: An Investigation on Accidents and its Causes. Researchgate, 23 (An Investigation on Accidents and its Causes).
Wibowo, T., Sukaryawan, I. M., & Dwi Hatmoko, J. U. (2020). Identifying Causal Factors of Accidents Related to Working at Height; A Case Study of a Construction Company. ICONETSI,7.
Nikhen Hanifah Alvianshah, Merry Sunaryo, Friska Ayu, Muslikha Nourma Rhomadhoni, Ratna Ayu Ratriwardhani, 2023, Evaluasi Penerapan Keselamatan dan Kesehatan Kerja Bekerja di Ketinggian, ARKESMAS, Volume 8, Nomor 2, Desember 2023, Program Studi D-IV Keselamatan dan Kesehatan Kerja, Fakultas Kesehatan, Universitas Nadlatul Ulama Surabaya, Indonesia
Wahyu Mei Trianto, 2020, Bekerja di Ketinggian Pada Pekerjaan Konstruksi – Peraturan dan Tindakan Pencegahan, Pusat Pengembangan Sumber Daya Manusia Minyak dan Gas Bumi, Cepu, Majalah Ilmiah Swara Patra Vol 10 No. 1 Tahun 2020
Nurhijrah, 2018, Pencegahan Resiko Kecelakaan Jatuh Dari Ketinggian Pada Pekerjaan Industri Konstruksi di Indonesia, Universitas Andi Djemma, Pena Teknik: Jurnal Ilmiah Ilmu-Ilmu Teknik Volume 3, Nomor 1, Maret 2018: 85 – 92.
Ali, A. M., Sangadji, F. A., & Kempa, M. (2018). Analisis Tingkat Kerusakan Bangunan Gedung Rusunawa Iain Ambon. Kokoh, 22(1), 1–14.
Ruli Nere Ramdani, Nia Kartika, Tahadjuddin, (2025), Aplikasi Perhitungan Biaya Dan Estimasi Waktu Untuk Bangunan Gedung, Jurnal Talenta Sipil, Vol 8, No 1 (2025): Februari, 17-25, Prodi Teknik Sipil FT Universitas Batanghari ISSN 2615-1634 (Online), DOI 10.33087/talentasipil. v8i1.692
Abrar Husen, Ir. MT., 2010, Manajemen Proyek, Edisi II, Yogyakarta, CV. ANDI OFFSET.
Hafnidar A. Rani, DR., 2016, Manajemen Proyek Konstruksi, Universitas Muhammadiyah Aceh, Deepublish, Sleman, Yogyakarta
Iribaram, F. W., & Huda, M., 2019, Analisa resiko biaya dan waktu konstruksi pada proyek pembangunan apartemen biz square rungkut surabaya. Axial: Jurnal Rekayasa Dan Manajemen Konstruksi, 6(3), 141154.
Ramdan, I. M., & Handoko, H. N., 2016, Kecelakaan Kerja Pada Pekerja Konstruksi Informal Di Kelurahan “X” Kota Samarinda. PERENNIAL, 12(1), 1–6. 2016
Destari, N., Widjasena, B., & Wahyuni, I., 2017, Analisis Implementasi Promosi K3 Dalam Upaya Pencegahan Kecelakaan Kerja Di PT X (Proyek Pembangunan Gedung Y Semarang). Jurnal Kesehatan Masyarakat, 5(1), 397–404.
Mayang Gita Lestari, Irika Widiasanti, Arief Saefudin, 2023, Penerapan Sistem Manajemen K3 Pada Pekerja Proyek Konstruksi Hotel Park Regis by Prince Menteng, Action Research Literate, 244-252, Vol. 7, No. 12, ISSN:2808-6988
Ishaq Abdullah, S. Ars., 2021, Buku Panduan Pelaksanaan Konstruksi Bangunan Gedung Berdasarkan Peraturan Pemerintah No. 16 Tahun 2021 tentang Pelaksanaan UU No. 28 Tahun 2002 tentang Bangunan Gedung, Kementerian PUPR, Dirjen Perumahan, Balai Pelaksana Penyediaan Perumahan Jawa I.
DOI: http://dx.doi.org/10.33087/talentasipil.v8i2.915
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University |
