Inovasi Material Berkelanjutan: Optimasi Penggunaan Abu Sabut Kelapa sebagai Alternatif Filler pada Aspal Beton

Sartika Nisumanti, Yuliantini Eka Putri, Ferry Desromi, Khodijah Al Qubro, Saripudin Saripudin, Muhammad Fikri

Abstract


The use of asphalt concrete (Laston) as a pavement construction material continues to increase, especially in Indonesia. Laston, which is made as a hot mix, requires filler to bind the aggregate particles. Conventional fillers such as stone ash, lime, and cement have limited supplies and high costs, so a more economical and easily available alternative is needed. This research aims to evaluate the use of coir ash as filler in a 60/70 penetration asphalt mixture and determine the optimum asphalt content (KAO) in the mixture. The test specimens were made using 4%, 4.5%, and 5% variations of coconut fiber ash (ASK) content in 6% asphalt. This research was conducted experimentally using the Marshall Test method. The results showed that the use of coir ash as filler can affect the mechanical properties of asphalt mixture. At 4% ASK content, the VIM value reached 6.939%, and the largest or closest VFA value was obtained at 5% ASK content of 44.838%. The results obtained were greater than the Bina Marga 2010 requirements, indicating a more porous mix and potentially reduced durability. However, the use of coir ash can be a sustainable and economical solution in road construction. Testing the normal AC-WC asphalt laston layer obtained an optimum asphalt content (KAO) value of 6%, with a VIM value of 4.145%, a VMA value of 17.439%, a VFA value of 76.304%, a stability value of 1446.3 kg, and a flow value of 3.19 mm.


Keywords


Coconut fiber ash, Asphalt Concrete, Marshall Test

Full Text:

PDF

References


Bethary, R. T., Subagio, B. S., Rahman, H., & Suaryana, N. (2019). Effect of recycled materials on marshall performance of hot asphalt mixture (HMA – RAP). IOP Conference Series: Materials Science and Engineering, 508, 012048. https://doi.org/10.1088/1757-899X/508/1/012048

Departemen Fisika Fakultas MIPA Universitas Padjadjaran, & Nurhilal, O. (2018). Pengaruh Komposisi Campuran Sabut dan Tempurung Kelapa terhadap Nilai Kalor Biobriket dengan Perekat Molase. Jurnal Ilmu dan Inovasi Fisika, 2(1), 8–14. https://doi.org/10.24198/jiif.v2i1.15606

Harnaeni, S. R., Pramesti, F. P., Budiarto, A., Setyawan, A., Khan, M. I., & Sutanto, M. H. (2020). Study on Structural Performance of Asphalt Concrete and Hot Rolled Sheet Through Viscoelastic Characterization. Materials, 13(5), 1133. https://doi.org/10.3390/ma13051133

Karyawan, I. D. M. A., Yuniarti, R., Widianty, D., Hasyim, H., & Wahyudi, M. (2021). Performance of Asphalt Mixture with Asbuton Based on Marshall Characteristics Compacted at Hot and Cold Temperatures. Jurnal Penelitian Pendidikan IPA, 7(4), 549–555. https://doi.org/10.29303/jppipa.v7i4.884

Kim, Y.-M., Kim, K., & Le, T. H. M. (2024). Advancing Sustainability and Performance with Crushed Bottom Ash as Filler in Polymer-Modified Asphalt Concrete Mixtures. Polymers, 16(12), 1683. https://doi.org/10.3390/polym16121683

Koitumet, J. S. M. (n.d.). FIBRE EXTRACTION AND CHARACTERIZATION FROM COCONUT HUSKS WASTE FOR INDUSTRIAL APPLICATION.

Kunanusont, N., Sangpetngam, B., & Somwangthanaroj, A. (2021). Asphalt Incorporation with Ethylene Vinyl Acetate (EVA) Copolymer and Natural Rubber (NR) Thermoplastic Vulcanizates (TPVs): Effects of TPV Gel Content on Physical and Rheological Properties. Polymers, 13(9), 1397. https://doi.org/10.3390/polym13091397

Nasrulloh, M., Sholichin, I., & Fatikasari, A. D. (2024). Analisis Pengaruh Serbuk Besi Sebagai Substitusi Agregat Halus pada Lataston Lapis Aus (HRS-WC) Terhadap Kinerja Jalan Beraspal. Jurnal Talenta Sipil, 7(2), 715. https://doi.org/10.33087/talentasipil.v7i2.616

Nisumanti, S., Amalia, G., & Putri, S. (2022). The Effect of Latex on The Characteristics of Asphalt Concrete Wearing Course. Proceedings of the International Conference of Contemporary Affairs in Architecture and Urbanism-ICCAUA, 5(1), 937–945. https://doi.org/10.38027/ICCAUA2022EN0146

Nisumanti, S., & Yusuf, M. (2020). Pengaruh Arang Cangkang Kelapa Sawit Sebagai Pengganti Filler Aspal Penetrasi 60/70. Jurnal Tekno Global UIGM Fakultas Teknik, 8(2). https://doi.org/10.36982/jtg.v8i2.900

Putra, N. A., & Putra, A. (2023). Pengujian Aproksimat Karbon Limbah Sabut Kelapa (Cocos nucifera). Jurnal Periodic Jurusan Kimia UNP, 12(1), 27. https://doi.org/10.24036/p.v12i1.116901

Rahman, H., & Zega, R. T. (2018). Analisis Kesesuaian Model Modulus Aspal dan Campuran Laston Lapis Aus untuk Aspal Modifikasi Asbuton Murni. Jurnal Teknik Sipil, 25(1), 71. https://doi.org/10.5614/jts.2018.25.1.9

Santoso, I., & Roy, S. K. (n.d.). PENGARUH PENGGUNAAN BOTTOM ASH TERHADAP KARAKTERISTIK CAMPURAN ASPAL BETON. 5(2).

Universidad de Antioquía-UdeA, Loaiza, A., Garcia, E., & Colorado, H. A. (2019). Evaluation of asphalt binder blended with coconut coir dust and residual coconut fibers for structural applications. Revista de La Construcción, 17(3), 542–554. https://doi.org/10.7764/RDLC.17.3.542

Yuniarti, R. (2015). MODIFIKASI ASPAL DENGAN GETAH PINUS DAN FLY ASH UNTUK MENGHASILKAN BIO-ASPAL. JURNAL SAINS TEKNOLOGI & LINGKUNGAN, 1(2). https://doi.org/10.29303/jstl.v1i2.8

Yuniarti, R., Hasyim, H., Rohani, R., & Widianty, D. (2021). SIFAT VOLUMETRIK CAMPURAN LASTON MENGGUNAKAN ASPAL MODIFIKASI GETAH PINUS DAN LIMBAH STYROFOAM. JURNAL SAINS TEKNOLOGI & LINGKUNGAN, 7(1), 66–77. https://doi.org/10.29303/jstl.v7i1.214

Yuniarti, R., Widianty, D., Rohani, R., & Hasyim, H. (2020). Tinjauan Durabilitas Campuran Asphalt Concrete Wearing Course Menggunakan Aspal Tua Dengan Berbagai Bahan Peremaja. JURNAL SAINS TEKNOLOGI & LINGKUNGAN, 6(2), 132–143. https://doi.org/10.29303/jstl.v6i2.141

Zhao, X., Lu, Z., Su, H., Le, Q., Zhang, B., & Wang, W. (2023). Effect of Sasobit/Waste Cooking Oil Composite on the Physical, Rheological, and Aging Properties of Styrene–Butadiene Rubber (SBR)-Modified Bitumen Binders. Materials, 16(23), 7368. https://doi.org/10.3390/ma16237368




DOI: http://dx.doi.org/10.33087/talentasipil.v8i1.861

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University
Adress: Fakultas Teknik, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: talentasipil.unbari@gmail.com


Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.