Produktivitas Alat Berat Concrete Pump dengan Perbandingan Elevasi Pengecoran

Maulana Zidan Dwi Cahya, Dimas Bagus Prasetyo, Hendrata Wibisana, Karina Meilawati Eka Putri

Abstract


Construction projects are influenced by various factors, one of which is the productivity of heavy equipment used. One such equipment used in concrete pouring projects is the concrete pump, which functions to transport fresh concrete to the pouring location. This study aims to measure the productivity and time efficiency of concrete pump usage in the construction of the Aston Inn Hotel in Lumajang. The equipment's productivity is calculated based on the volume of concrete pumped and the time required for the pouring process. The results showed that the productivity of the concrete pump on the 5th floor was 0.219 m³/min, while on the 6th floor, it was 0.166 m³/min, with an elevation difference of 3.4 meters between the floors. Time efficiency was also measured, with the pouring of 63 m³ of concrete taking between 30 and 45 minutes, depending on the proximity of the concrete mixer truck to the project site. This study provides insights into how optimizing the use of heavy equipment can improve productivity and efficiency in construction projects, especially in concrete pouring tasks with a concrete pump.


Keywords


Heavy Equipment Productivity; Concrete Pump; Truck Mixer; Heavy Equipment; Concrete Casting.

Full Text:

PDF

References


Adlini, M. N., Dinda, A. H., Yulinda, S., Chotimah, O., & Merliyana, S. J. (2022). Metode Penelitian Kualitatif Studi Pustaka. Edumaspul: Jurnal Pendidikan, 6(1). https://doi.org/10.33487/edumaspul.v6i1.3394

Ahmad Kholil. (2012). Alat Berat.

Akbar, F., Yamali, F. R., & Dwiretnani, A. (2021). Analisa Pengunaan dan Produktivitas Alat Berat pada Kegiatan Peningkatan Ruas Jalan Simpang Pauh – Air Hitam Provinsi Jambi. Jurnal Talenta Sipil, 4(2), 114. https://doi.org/10.33087/talentasipil.v4i2.57

Dewi, A. A., Azwarman, A., & Mona, E. (2021). Kajian Penggunaan Alat Berat Pada Proyek Peningkatan Jaringan Irigasi Daerah Irigasi Batang Sangkir-Kerinci. Jurnal Talenta Sipil, 4(2), 162. https://doi.org/10.33087/talentasipil.v4i2.68

Fadli, M. R. (2021). Memahami desain metode penelitian kualitatif. HUMANIKA, 21(1). https://doi.org/10.21831/hum.v21i1.38075

Hendri, M., Wior, T., Mandagi, R. J. M., & Tjakra, J. (2015). ANALISA KELAYAKAN INVESTASI READY MIX CONCRETE DI PROVINSI SULAWESI UTARA. Jurnal Sipil Statik, 3(7), 492–502.

Kartika, N., Robial, S. M., & Pratama, A. (2021). ANALISIS PRODUKTIVITAS TENAGA KERJA PADA PEKERJAAN KOLOM DI PROYEK PEMBANGUNAN GEDUNG PEMDA KABUPATEN SUKABUMI. JURNAL MOMEN TEKNIK SIPIL, 3(2). https://doi.org/10.35194/momen.v3i2.1207

Limanto, S. (2009). ANALISIS PRODUKTIVITAS CONCRETE PUMP PADA PROYEK BANGUNAN TINGGI. In Konferensi Nasional Teknik Sipil (Vol. 3).

Nur, A. L., Mahasiswa, S., Sipil, J. T., Samarinda, P. N., & Pengajar, S. (2018). PERHITUNGAN PRODUKTIFITAS DAN ANGGARAN BIAYA ALAT BERAT PEKERJAAN RIGID PAVEMENT JALAN SEBULU MENUJU JALAN PROVINSI STA 0+000 SAMPAI DENGAN STA 5+400 KABUPATEN KUTAI KARTANEGARA CALCULATION PRODUCTIVITY AND COST OF HEAVY EQUIPMENT FOR RIGID PAVEMENT ROAD AT SEBULU TO PROVINSI STA 0+000 UP WITH STA 5+400 KUTAI KARTANEGARA IGN Aditya Dhiva Yudi Pranoto. 1.

Rochmanhadi. (1984). Alat Berat dan Penggunaannya. Departemen Pekerjaan Umum. Jakarta.

Rosiyanti, S. F. (2008). ALAT BERAT UNTUK PROYEK KONSTRUKSI.

Sri Wahyuningsih. (2018). Pengaruh Lingkungan Kerja Terhadap Produktivitas Kerja.

Wayan Jawat, I., Agung Sagung Dewi Rahadiani, A., & Ni Komang Armaeni, dan. (2018). PRODUKTIVITAS TRUCK CONCRETE PUMP DAN TRUCK MIXER PADA PEKERJAAN PENGECORAN BETON READY MIX. PADURAKSA, 7(2).

Widiasanti, I., Musti, A. R., Rabitsani, A. I., Afriani, B., Ardiansyah, M. I., & Seftiani, N. (2023). Pentingnya Implementasi Manajemen Waktu di Dunia Konstruksi. Jurnal Talenta Sipil, 6(2), 236. https://doi.org/10.33087/talentasipil.v6i2.291

yoventa rhebi, M., Rasidi, D., & Suhudi. (2017). ANALISIS PENERAPAN MANAJEMEN WAKTU ADA PROYEK BANGUNAN PERKANTORAN REVISTAR 3 LANTAI GRAHA DEWATA MALANG.




DOI: http://dx.doi.org/10.33087/talentasipil.v8i1.825

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University
Adress: Fakultas Teknik, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: talentasipil.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.