Karakteristik Kuat Tekan Beton Menggunakan Serbuk Besi dengan Bahan Tambah Bestmittel

Muhammad Husein Saputra, Sartika Nisumanti, Febryandi Alfuady

Abstract


Concrete, a widely used building material, is prized for its exceptional compressive strength. The field of solid and sustainable infrastructure is seeing swift progress in concrete technology. Numerous ideas and innovations have emerged to enhance concrete quality, including the incorporation of iron powder as a substitute material. This substitution aims to modify concrete's characteristics and improve its strength and hardening time. The research into the compressive strength of concrete using iron powder involved an experimental technique. Findings from this research indicate that a concrete mix containing 7.2% iron powder and 0.7% bestmittel achieved a compressive strength of 28.75 MPa after 28 days. This demonstrates that both iron powder and bestmittel positively influence the compressive strength of concrete. Additionally, the optimal mixture, 7.2% iron powder combined with 0.7% bestmittel, resulted in a compressive strength of 28.75 MPa, reflecting a 3.19% increase compared to standard concrete.

Keywords


Additives, Bestmittel, Concrete, Iron Powder

Full Text:

PDF

References


A Rivai, M., Kimi, S., & Revisdah, R. (2020). Inovasi Beton Ramah Lingkungan. Bearing : Jurnal Penelitian Dan Kajian Teknik Sipil, 6(2). https://doi.org/10.32502/jbearing.2829201962

Arumningsih, D. & Ahmadi. (2021). Inovasi Beton Kuat Tekan Awal Tinggi Yang Memadat Sendiri Menggunakan Limbah Abu Marmer. Jurnal Teknik Sipil Dan Arsitektur, 26(1), 55–63. https://doi.org/10.36728/jtsa.v26i1.1245

Asri, R., & Nisumanti, S. (2014). Kuat Tekan Beton Mutu Tinggi Dengan Penambahan Conplast SP 337. Jurnal Tekno Global, 3(1), 14–20.

Azhar Darujati, Sartika Nisumanti, & Ghina Amalia. (2023). Analisis Kuat Tekan Dan Ultrasonic Pulse Velocity (UPV Test) Pada Mutu Beton K 350 Menggunakan Beton Sisa Pengujian Sebagai Substitusi Agregat Kasar. PADURAKSA: Jurnal Teknik Sipil Universitas Warmadewa, 12(1), 30–35. https://doi.org/10.22225/pd.12.1.5890.30-35

Febriana, A. M., Nisumanti, S., & Minaka, U. S. (2022). Pengaruh Penambahan Abu Serabut Kelapa Dan Sikacim Concrete Additive Terhadap Kuat Tekan Beton. Jurnal Gradasi Teknik Sipil, Volume 6(2), 74–81.

Febryandi, F., Devi, D. S., Julio, R. R., & Cristine, A. (2022). Analisis Pengaruh Penambahan Kaolin Sebagai Subtitusi Semen Terhadap Kuat Tekan Beton Ringan. Jurnal Tekno Global UIGM Fakultas Teknik, 11(1). https://doi.org/10.36982/jtg.v11i1.2804

Firdaus, M. R., Nisumanti, S., & Al Qubro, K. (2022). Pengaruh Pengerasan Beton Menggunakan Superplasticizer Terhadap Kuat beton Busa. Jurnal Tekno Global, 11(2), 56–61. https://doi.org/10.36982/jtg.v11i2.3049

Hadiyana, D., & Nisumanti, S. (2016). Penggunaan Sika Viscocrete 3115 ID Untuk Memudahkan Pengerjaan (Workability Beton Mutu Tinggi K.350 Dan Kuat Tekan Beton). Jurnal Penelitian Dan Kajian Teknik Sipil, 4(3), 107–113.

Hasanah, M., Nisumanti, S., & Febryandi. (2024). Experimental Study Of The Utilization Of Pineapple Leaf Fiber With The Addition Of Epoxy Resin To The Tensile Strength Break Of The Concrete. Journal of Engineering Design and Technology, 24(4), 63–68.

Kotarumalos, S. H., Limehuwey, R., & Multi, W. (2023). Genesa Dan Karakteristik Endapan Pasir Besi. Jurnal Unppati, 1(1), 26–37.

Mataram, N., Ramadhani, S. S., & Setiyawan, K. (2020). Optimasi Parameter Proses Milling dengan Pendinginan Fluida Alami (Cold Natural Fluid) terhadap Kualitas Permesinan Baja ST 42 dengan Metode Taguchi. Prosiding Seminar Nasional Teknik Tahun 2020 (SENASTIKA 2020).

Nisumanti, S., Putri, Y. E., Department of Civil Engineering, Universitas Baturaja, South Sumatera, Indonesia, -, T., Department of Civil Engineering, Koe, IIUM, Fitri, N., Department of Civil Engineering, Universitas Taman Siswa, South Sumatera, Indonesia, Nazila, I., Department of Civil Engineering, Universitas Indo Global Mandiri, South Sumatera, Indonesia, Hidayat, F., & Department of Civil Engineering, Universitas Indo Global Mandiri, South Sumatera, Indonesia. (2024). Optimization of Styrofoam as Concrete Replacement Material Subjected to Compressive Strength. Jurnal Kejuruteraan, 36(4), 1477–1482. https://doi.org/10.17576/jkukm-2024-36(4)-13

Rahmadona, E., Amalia, K. R., Ulfah, L., & Praditya, N. (2024). Analisis Kuat Tekan Beton dengan Pemanfaatan Silica Fume dan Fly Ash Sebagai Pengganti Semen Sebagian. Jurnal Talenta Sipil, 7(1), 217. https://doi.org/10.33087/talentasipil.v7i1.451

Setiyarto, Y. D. (2022). Pengaruh Penggunaan Zat Epoxy Terhadap Kuat Tekan Beton Normal. CRANE: Civil Engineering Research Journal, 3(1), 12–21. https://doi.org/10.34010/crane.v3i1.7135

Tupu, Y., Ola, P. D., Nitti, F., & Darmakusuma, D. (2022). Pemanfaatan Limbah Serbuk Besi Sebagai Penguat Warna Merah Ekstrak Biji Pinang (Areca catechu L.). Jurusan Kimia Fakultas Sains Dan Teknik Universitas Nusa Cendana, 167–174.

Ulhusna, N., Handayani, N., & Saputra, A. N. (2022). Analisis Kuat Tekan Beton Normal Terhadap Penambahan Additive Bestmittel. Konferensi Nasional Teknik Sipil.

Y. Khairizal, S. N., & Ibrahim. (2023). Analisis Pengaruh Limbah Serbuk Besi Terhadap Kuat Tekan Beton. Jurnal Poltek Sriwijaya, 10(2).




DOI: http://dx.doi.org/10.33087/talentasipil.v9i2.936

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University
Adress: Fakultas Teknik, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: talentasipil.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.