Identifikasi Risiko Kecelakaan dan Keselamatan Kerja (K3) pada Pelaksanaan Proyek Konstruksi di Sumatera Selatan

Kiki Rizky Amalia, Sheragizca Yolanda Situmeang, Ahmad Syapawi, Akhmad Dzaky, Na’ilah Zhafirah, Ragil Agustian

Abstract


The construction industry is one of the sectors with a high level of risk, particularly concerning Occupational Health and Safety (OHS). These risks may include potential workplace accidents, schedule delays, cost overruns, asset damage, and disruptions to work quality. Understanding and managing these risks is crucial to minimizing the negative impacts that may arise during project execution, including in South Sumatra Province. This study aims to identify risks that emerge due to the lack of OHS implementation in construction projects, in order to formulate strategies for risk prevention and mitigation. Data collection was carried out by distributing questionnaires to respondents from 5 building construction projects and 8 civil construction projects in South Sumatra, involving a total of 31 respondents.The analysis reveals that the highest risks in building construction projects include falling from heights, injuries caused by manual tools, and being struck by heavy equipment. Based on the data, the risk identification indicates that falling from heights is the most frequent incident. These three risks consistently received a mean score of 5, indicating a very high category in risk assessment. The causes of these risks include the failure to use Personal Protective Equipment (PPE) and unsafe, hazardous, or unhealthy workplace conditions. Risk control measures that are routinely implemented include the installation of OHS signage and safety lines, regular OHS communication with workers, routine inspections and evaluations of tools and heavy equipment, and the availability of work methods and programs. To further reduce these risks, risk control is carried out following the hierarchy of controls, beginning with Personal Protective Equipment (PPE), Administrative Controls, Engineering Controls, Substitution, and Elimination.

Keywords


construction; Risk; Occupational Health and Safety; South Sumatera.

Full Text:

PDF

References


Ardiansyah, M. K., Irawan, S., & Purba, H. H. (2022). Identifikasi Faktor Risiko Keselamatan Pada Proyek Konstruksi Bangunan Gedung di Indonesia dalam 10 Tahun Terakhir (2011-2021): Kajian Literatur. Jurnal Teknologi Dan Manajemen, 20(1), 45–58. https://doi.org/10.52330/jtm.v20i1.46

Arifin, A. Z., & Harianto, F. (2020). Pengaruh Penerapan Keselamatan Dan Kesehatan Kerja (K3) Serta Lingkungan Kerja Terhadap Produktivitas Kerja Di Surabaya. Rekayasa: Jurnal Teknik Sipil, 5(1), 19. https://doi.org/10.53712/rjrs.v5i1.856

Arta, I. P. S. (2021). Manajemen Risiko Tinjauan Teori dan Praktis.

BPJS Ketenagakerjaan. (2023). Laporan Ketenagakerjaan Palembang 2023. Palembang: BPJS Ketenagakerjaan.

Fathovani, K. B., Supriyadi, S., & Nalhadi, A. (2024). Perencanaan Pengendalian Risiko Bahaya Pada Aktivitas Kerja Water Treatment Plant Menggunakan Bow Tie Analysis. Industri Inovatif : Jurnal Teknik Industri, 14(2), 191–199. https://doi.org/10.36040/industri.v14i2.10711

Ihsan, T., Hamidi, S. A., & Putri, F. A. (2020). Penilaian Risiko dengan Metode HIRADC Pada Pekerjaan Konstruksi Gedung Kebudayaan Sumatera Barat. Jurnal Civronlit Unbari, 5(2), 67. https://doi.org/10.33087/civronlit.v5i2.67

Jumhana, E., Fadilah, A., Jiddan Anugrah Novrio, M., & Haki, U. (2025). Keselamatan Dan Kesehatan Kerja (K3): Pilar Utama Dalam Produktivitas Dan Keberlanjutan. Bureaucracy Journal: Indonesia Journal of Law and Social-Political Governance, 5(1), 619–633. https://doi.org/10.53363/bureau.v5i1.548

Meilin, A. (2021). Manajemen Keselamatan Dan Kesehatan Kerja Strada Press.

Puteri, E. P., Handayani, E., Zulfiati, R., Dwiretnani, A., & Dony, W. (2023). Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) dalam Pelaksanaan Proyek Konstruksi di Muara Sabak. Jurnal Talenta Sipil, 6(1), 163. https://doi.org/10.33087/talentasipil.v6i1.193

Simanjuntak, I. J., Siagian, R. T., Prasetyo, R., Rozak, N. F., & Purba, H. H. (2022). Manajemen Risiko Pada Proyek Konstruksi Jembatan: Kajian Literatur Sistematis. Jurnal Teknologi Dan Manajemen, 20(1), 59–76. https://doi.org/10.52330/jtm.v20i1.47

Sucita, I. K., & Broto, A. B. (2014). Identifikasi dan Penanganan Risiko K3 Pada Proyek Konstruksi Gedung. Jurnal Poli-Teknologi, 10(1). https://doi.org/10.32722/pt.v10i1.433

Tjahjono, B., Zebua, D., & Mita, V. (2023). Analisis Kajian Literatur Risiko Keselamatan Dan Kesehatan Kerja (K3) Dalam Pembangunan Gedung Bertingkat Di Indonesia. Jurnal Penelitian Jalan Dan Jembatan, 3(2), 11–16.

Umaindra, M. A., & Saptadi, S. (2018). Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode Jsa (Job Safety Analysis) Di Departemen Smoothmill Pt Ebako Nusantara. Industrial Engineering Online Journal, 7(1), 1–10. https://ejournal3.undip.ac.id/index.php/ieoj/article/view/20725

Walujodjati, E., & Rahadian, S. P. (2021). Analisis Manajemen Risiko K3 Pekerjaan Jalan Tol Cisumdawu Phase III. Jurnal Konstruksi, 19(1), 60–69. https://doi.org/10.33364/konstruksi/v.19-1.874

Yuliani, U. (2017). Manajemen Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Infrastruktur Gedung Bertingkat. Jurnal Desain Konstruksi, 16(1), 3–10.




DOI: http://dx.doi.org/10.33087/talentasipil.v8i2.1000

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Talenta Sipil, Faculty of Engineering, Batanghari University
Adress: Fakultas Teknik, Jl.Slamet Ryadi, Broni-Jambi, Kec.Telanaipura, Kodepos: 36122, email: talentasipil.unbari@gmail.com

Creative Commons License This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.